Dishwasher Table - Commercial Dishwasher Systems
From a standard dishwasher table to complete commercial dishwasher systems for high volume installations, Target manufacture tabling to make dishwashing an efficient, time saving operation.
Target's dishwasher tabling is constructed using heavy guage, fully welded stainless steel, with profiles to suit major dishwasher manufacturers specifications as well as your requirements.
For smaller commercial kitchens, where space is limited, Target Catering Equipment manufacture a stainless steel sink and commercial dishwasher combination which can be tailored to your exact requirements. Made to measure stainless steel tables are also manufactured, providing a seamless workarea for any catering kitchen.
Call 01452 410447 to discuss your dishwasher table requirements further
From the smallest glasswasher, commercial dishwasher and passthrough dishwashers to conveyor and flight dishwashers, Target Catering Equipment offer a complete commercial dishwasher range and design, manufacture and install dishwasher tabling options which make the best use of space available and meet the needs of the catering establishment.
Passthrough Dishwasher Tabling
Passthrough dishwashers fit between two stainless steel tables which enables the water to drain back into the dishwasher. These are called the inlet and the outlet tables, one being used as the soiled, or as commonly termed "dirties" table and the other, the clean table. The setup of the passthrough dishwasher system can either be in a staight line or as a corner installation.
The soiled items are stacked, sorted, racked into baskets and pre rinsed using a pre rinse spray over the sink. The basket is then slid through the dishwasher. Passthrough dishwashers are suitable for higher volume commercial catering establishments.
Pre Wash Inlet Tables With Sinks
Designed for the "dirties" side of the dishwasher, this stainless steel tabling includes stainless steel sinks with the option to incorporate a pre rinse spray arm shower. The pre wash inlet tables with sink facility provides an area for easy rinsing prior to passing dishes through the dishwasher. The loaded trays are then slid along the sink or table tracks into the passthrough dishwasher, this reduces the need for lifting heavy baskets in and out of the dishwasher.
A stainless steel shelf can be added to the base of your sink to allow for extra storage space. This is ideal for storing dishwash detergent and rinse aid products.
Target can also incorporate a bin scrapping ring into the table top design, with bin located under this enables easy removal of waste food prior to dishwasher loading.
Plain Dishwasher Inlet Tables
Plain dishwasher inlet tables are produced without the addition of sinks. These fit easily to the inlet side of your passthrough dishwasher and allow the dishwasher trays to be easily slid along the tracks into your dishwasher.
Dishwasher Outlet Tables
Usually a plain stainless steel table is used on the outlet side of the passthrough dishwasher. This enables clean items to be removed from the passthrough dishwasher and allowed to air dry. Target can also incorporate a racking system under the outlet table to allow for baskets to be neatly stored away.
Rack And Roller Conveyor Systems
For higher volume commercial dishwasher installations, rack and roller conveyor dishwasher tables may be required. Target manufacture these to fit individual requirements.
Bespoke Pot Wash Sinks
Stainless steel pot wash sinks manufactured to your exact requirements. Target Catering Equipment's pot wash sinks can be incorporated into a complete dishwasher system to suit catering kitchens large and small.